ACC Keyboard for Open Interface III

B I U S link image code list	Show page   Syntax
!Firmware !!BankA and BankB (ACC keyboard) Keyboard functionality enable in Open Intrface III firmware with enable below variables to 1 {{ boolean ACC_KEYBOARD = 1; // Shift in/out register via ACC boolean KeyboardAnswLed = 1; // Keyboard Led shown answered UDP packet from IP RemoteSwitch }} Also must be installed and configured ethernet module {{ boolean ETHERNET_MODULE = 1; // enable ETHERNET module (must be installed) }} and [IP Switch with ESP32-GATEWAY] in local network with DHCP {{ boolean RemoteSwitch = 1; // IP controled remote RemoteSwitch }} devices are pair in network automaticaly. How ID are use on actual selected band, determines table in firmware {{ // BAND TO REMOTE SWITCH ID int BandToRemoteSwitchID[12] = { /* IP Switch ID 0-7 */ 0, // band 0 (no data) 0, // Band #1 [160m] 0, // Band #2 [80m] 0, // Band #3 [40m] 0, // Band #4 [30m] 0, // Band #5 [20m] 0, // Band #6 [17m] 0, // Band #7 [15m] 0, // Band #8 [12m] 0, // Band #9 [10m] 0, // Band #10 [6m] 0, // Band #11 [2m] }; }} By default using on all bands IP switch with ID 0. !!BankC - rotary encoder Open Interface III use for IP switching from rotary encoder (BankC) independents hardware. ID calculate automaticaly increase eight from ID for ACC keyboard. This means that in previous situation on all bands rotary encoder (menu 20) use IP switch with ID 8. Range rotary encoder is up to 16 outputs, wich may be limited for each band separately in table {{ int IpSwBankCrange[8]= { /* number of IP switch bank C position 2-16 range */ 16, // ID 8 8, // ID 9 8, // ID A 8, // ID B 8, // ID C 8, // ID D 8, // ID E 15, // ID F }; }}
Password Summary of changes