Band decoder for Arduino

B I U S link image code list	Show page   Syntax
!!ICOM ACC(2) voltage '''Activate''' uncomment line {{#define ICOM_ACC}} In icom_acc.h file you can set '''voltage range rules to select individual output''' relays. {{ //=====[ Icom ACC voltage range ]=========================================================== if (VOLTAGE > 0.73 && VOLTAGE < 1.00 ) {BAND=10;} // 6m * * * * * * * * * * * * * * * * if (VOLTAGE > 1.00 && VOLTAGE < 1.09 ) {BAND=9;} // 10m * Need * if (VOLTAGE > 1.09 && VOLTAGE < 1.32 ) {BAND=8;} // 12m * calibrated to your * if (VOLTAGE > 1.32 && VOLTAGE < 1.55 ) {BAND=7;} // 15m * own ICOM * if (VOLTAGE > 1.55 && VOLTAGE < 1.77 ) {BAND=6;} // 17m * ---------------- * if (VOLTAGE > 1.77 && VOLTAGE < 2.24 ) {BAND=5;} // 20m * (These values have * if (VOLTAGE > 0.10 && VOLTAGE < 0.50 ) {BAND=4;} // 30m * been measured by any) * if (VOLTAGE > 2.24 && VOLTAGE < 2.73 ) {BAND=3;} // 40m * ic-746 * if (VOLTAGE > 2.73 && VOLTAGE < 2.99 ) {BAND=2;} // 80m * * if (VOLTAGE > 2.99 && VOLTAGE < 4.00 ) {BAND=1;} // 160m * * * * * * * * * * * * * * * * if (VOLTAGE > 0.00 && VOLTAGE < 0.10 ) {BAND=0;} // parking //==========================================================================================}} When calibrating can read the measured voltage in the terminal, enable the echo function and set serial baudrate {{#define SERIAL_echo #define SERBAUD 9600}} [https://remoteqth.com/img/wiki-bd-icom.png|noborder] * short '''JP3''' [Next > Configure outputs -->|Band decoder for Arduino#Configure_outputs]
Password Summary of changes