Band decoder for Arduino

B I U S link image code list	Show page   Syntax
!Upload Firmware Band decoder settup is performed via firmware source code. It is compile and upload to device with [Arduino GUI.|https://www.arduino.cc/en/Main/Software] *'''For beginners''' [Getting Started with Arduino|https://arduino.cc/en/Guide/HomePage]. * [Download|https://remoteqth.com/arduino-band-decoder.php#download] source code and [configuring|Band decoder for Arduino#Configure_inputs] it. *'''Before uploading''' new firmware you '''have to''' ** remove top cover - loosening the two screws on left and right side of the box. ** '''remove JP1, JP2 and JP7''' jumpers * Select menu ** Tools/Board/Arduino nano ** Tools/Procesor/ATmega328 ** Tools/Port/<your port> * Upload * After upload set back jumpers dependency to setup. Have a fun! !!Third party Firmware * Set to "ON" the relay "14" only at the power on - by IZ2HFG - [Download|https://remoteqth.com/sw/band-decoder-iz2hfg.zip] ---- [<-- Web page|https://remoteqth.com/arduino-band-decoder.php] | [HamShop.cz version -->|Band decoder for Arduino - from HamShop.cz]
Password Summary of changes