Manual IP switch II

B I U S link image code list	Show page   Syntax
!Quick start guide in two step [https://remoteqth.com/img/wiki-manual-ipsw-06.png|noborder] Manual IP switch is consists of two parts # '''IP Switch relay driver KIT''' ** Assembly KIT by this instructions [rev0.2|IP Switch with ESP32-GATEWAY] | [rev0.4|https://remoteqth.com/w/doku.php?id=ip-switch]. ** Connect ethernet to local LAN with available DHCP server ** Connect DC Power *** rev 0.2 '''{.redka#id color: #f23f37}5V{/}''' DC adapter - higher voltage damage both electronics! *** rev 0.4 '''{.redka#id color: #f23f37}12V{/}''' DC ** Set NET-ID-sufix with BCD switch in the range 0-7, for example 0. # '''IP control''' ** This part is assembled and tested. ** Connect ethernet to local LAN with available DHCP server ** Set NET-ID-sufix with bottom side BCD switch in the range 0-7, '''the number must be the same as on IP-switch relay driver.''' ** Connect micro USB cable for power supply. ** Wait to pair and start to use.
Password Summary of changes