Remote multi rotator control

B I U S link image code list	Show page   Syntax
!software Configuration * configure from master tree [Arduino firmware by K3NG|https://blog.radioartisan.com/yaesu-rotator-computer-serial-interface/], or '''download''' preconfigured version ** [2014-07-08.zip|https://remoteqth.com/download-count.php?Down=sw/k3ng-arduino-rotator-interface-2014-07-08.zip] ** [2013-10-26.zip|https://remoteqth.com/download-count.php?Down=sw/k3ng-arduino-rotator-interface-2013-10-26.zip] ** Change the Baud rate to 9600 (at K3NG source code its 115.k baud the preset){{#define SERIAL_BAUD_RATE 9600}} * install [RemoteQTH server|RemoteQTH-server] on SD card for Raspberry PI ** login (yourcall/1234)to web interface and update server from status page ** change login and password in menu SETTINGS/LOGIN ** in menu SETTINGS/WEB RELAY change name for first relay to POWER and others set to n/a ** in menu SETTINGS/ROTATORS set number on Four and configure each rotator *** set Name *** replug usb and find ID from pop-up window *** From/To azimuth without overlap *** Get/Set sommand by defaukt *** Your locator and apply ** For detection USB interface replug all interface by turning power off from the menu CONTROL/SWITCH RELAY - Recognized USB devices shown in STATUS page as rot1 , rot2, rot3 and rot4
Password Summary of changes