RX antenna - Bi-directional 2-wire beverage ONE coax output

KIT - all parts you need(Edit)

The drill drawing(Edit)

Paste the drawing on the box and fix it with some tape.

Drill 3 or 3,2mm holes for connector.

Drill 4mm holes for antenna screws.

Bend the screw heads into box

- use 6mm drill and do it slowly by hand

Insert the screws(Edit)

Insert stainless screws 4mm with

Mount the RF connector(Edit)

insert connector and use steinless M3x8 and one M3x10 with grounding eye.

Drill the hole for the PCB holder(Edit)

Front side(Edit)

Front side(Edit)

Front side(Edit)

Front side(Edit)

Front side(Edit)

Front side(Edit)

Front side(Edit)

Front side(Edit)

Front side(Edit)

Front side(Edit)

Front side(Edit)

Front side(Edit)

Front side(Edit)

Common-mode coax choke(Edit)

Wind the coax(Edit)

- Wind the coax as is on the picture, there should be 7 or 8 turns.

- fix it by one binder and use second one to fix choke to the PCB

Solder the coax (Edit)

- use second binder to fix choke to the PCB

Front side(Edit)

Front side(Edit)

Front side(Edit)

Front side(Edit)

Front side(Edit)

Front side(Edit)

Front side(Edit)

Front side(Edit)