RX antenna - K9AY loops switch with remotly VARIABLE Rload

Assembled KIT(Edit)

Why variable Rload???(Edit)

- look at far field plots from MMANA

• bigger MMANA far field

The drill drawing(Edit)

Paste the drawing on the box and fix it with some tape.

Schematic diagram(Edit)

• bigger schematic diagram

Voltage controlled resistor(Edit)

- insert VAC plus to plus - check package

Protection diodes(Edit)

- solder 5 + 5 diodes

- these diodes protect Rload resistor against high power, electrostatic etc.

Insert rest parts(Edit)

- chooce the control way...

TRANSFORMERS winding - very important thing!(Edit)

• for 50 ohm coax feed line : 2 turns on primar (coax) and 6 turns on secondar side (loop)
• for 75 ohm coax feed line : 2 turns on primar (coax) and 5 turns on secondar side (loop)

Front side(Edit)

Front side(Edit)

Common-mode coax choke(Edit)

Wind the coax(Edit)

- Wind the coax as is on the picture, there should be 7 or 8 turns.

- fix it by one binder and use second one to fix choke to the PCB

Solder the coax (Edit)

KIT - all parts assembled.(Edit)

Example of controller.(Edit)

• bigger schematic

K9AY loops design example.(Edit)

• MMANA file of my small design for 160 and 80m