Web switch Relay 0.2 assembly
This revision is from 2016/03/22 01:12. You can Restore it.
Part list(Edit)
| PCB | |
| R 16x | resistor 1k |
| D 16x | LED diode |
| P5,P8 | header 2x10pin |
| Terminal 2x | double |
| Terminal 16x | triple |
| Relay 16x | SPDT |
| Flat cable 20pin | about 30cm |
| Pressing connector | two |
| Six distance spacers |
Assembly gallery(Edit)
✔ All components
❏ Solder all resistor on bottom side
❏ Solder all resistor on top side
✔ Next step is LED diode - necessary to observe polarity
❏ Solder all LED
❏ C1 capacitor
❏ Eight ULNs IO
❏ Short pin header on bottom side
❏ Long pin header on bottom side
❏ Four 20pin header and two jumper on top side
❏ Four distance spacers M3 x 35 mm